bx16v top heater matrix hose

[greendale65]

Hello all, Any one out there got the top heater matrix
hose for my valver.
Happy new year to you all.

[Vanny]

Without wishing to create a duplication of the many BXClub threads, can I just double check that you don't want to buy a set of silicon hoses from Bakers because of cost?

Top hose is part number 96 016 146
Bottom hose is part number 95 630 937 for a phase 1, 96 103 041 for a phase 2

These hoses are no longer available from Citroen, but you might find a set if you Google the part numbers

[Vanny]

Have you considered a generic flexible hose such as these

http://www.hoseworld.com/acatalog/UNREI ... _HOSE.html

I use hose world a lot through work so can recommend them

[greendale65]

Without wishing to create a duplication of the many BXClub threads, can I just double check that you don't want to buy a set of silicon hoses from Bakers because of cost?

Top hose is part number 96 016 146
Bottom hose is part number 95 630 937 for a phase 1, 96 103 041 for a phase 2

These hoses are no longer available from Citroen, but you might find a set if you Google the part numbers

Hello Vanny, Reason at the moment not buying from bakers
I have a lot of jobs to get done on my valver owing
to the fact the garage who was looking after my car
did not do some work correctly , this came to my attention
when I took my car to main Citroen garage,
so at this time I'm hoping to get a used
top matrix , if I had no other jobs to be done
would go to Baker .
( Will give it a month if nothing turns up
will have to rethink .)
Thanks for your help on this.

[greendale65]

Have you considered a generic flexible hose such as these

http://www.hoseworld.com/acatalog/UNREI ... _HOSE.html

I use hose world a lot through work so can recommend them

Hello again, Would you know the diameter on these matrix hoses.
Thanks Alan

[Vanny]

Service Citroen lists the upper hose as

HEATER WATER HOSE
DIAM 19,2X27,4

So I would guess 19.2mm id and 27.4mm OD.

And the lower hose as

HEATER WATER HOSE
DIAM INT 20 ET 22

[greendale65]

Service Citroen lists the upper hose as

HEATER WATER HOSE
DIAM 19,2X27,4

So I would guess 19.2mm id and 27.4mm OD.

And the lower hose as

HEATER WATER HOSE
DIAM INT 20 ET 22

Thanks will give it a go.